Short selection of references - Where to use it?
1. To induce the milk flow into the Teflon chamber with stainless steel chips (at flow rate of 340 mL/h and 980 mL/h) to study Staphylococcus epidermidis adherence
Zoran Jaglic, Dana Cervinkova, Elleni Michu, Martina Holasova, Petr Roubal, Hana Vlkova, Vladimir Babak, Jarmila Schlegelova, Effect of milk temperature and flow on the adherence of Staphylococcus epidermidis to stainless steel in amounts capable of biofilm formation, Dairy Sci. & Technol. (2011) 91:361–372
2. To maintain constant pH for the accurate quantitative determination of net proton production or consumption in chemostat cultures of Candida utilis
CASTRILLO, I. DE MIGUEL AND U. 0. UGALDE, Proton Production and Consumption Pathways in Yeast Metabolism. A Chemostat Culture Analysis, YEAST VOL. 11: 1353-1365 (1995)
3. To supply feed medium into the bioreactor and the feed flow rate was kept constant by controlling the pump speed to get a medium dilution rate ( D ) of 0.05 per hour (h-1)
A.H. Seifert, S. Rittmann, S. Bernacchi, C. Herwig, Method for assessing the impact of emission gasses on physiology and productivity in biological methanogenesis, Bioresource Technology, Volume 136, May 2013, Pages 747–751
4. To feed concentrated nutrient solutions for the production of Erythromycin from the strain Saccharopolyspora erythraea in fed-batch
Potvin, Jean; Peringer, Paul: Ammonium regulation in Saccharopolyspora erythraea Part II Regulatory effects under different nutritional conditions. Biotechnology Letters. 1994, 16(1): 69-74
5. To study the effect of flow rate on the analytes retention in range of 1.0 - 6.0 mL/min and eluent flow rate from 0.5 to 2.0 mL/min
Alireza Asghari, Bahram Mohammadi, Nano-alumina coated with sodium dodecyl sulfate and modified with 4-(2-Pyridylazo) resorcinol for extraction of heavy metals in different matrixes, Journal of Industrial and Engineering Chemistry, Volume 20, Issue 3, 25 May 2014, Pages 824-829
↑ Up
|
|